|
|
|
|
How do I reset my Jabra PRO headset - 920, 925, 930, 935. I just keeps beeping all the time.
|
|
| |
Sometimes after a power outage the headset will lose sync with the headset's base unit. If you hear a constant ringtone or beeping in the headset you will need to perform a full reset. This reset is only for the Jabra PRO series (920, 925, 930, 935). It will allow the headset to "sync" again wit...
|
|
|
How do I fix the Jabra Lifter? It goes up and down randomly. |
|
| |
The Jabra wireless headsets are designed to work with various telephones. Most phones will work fine with the default setting on the wireless headset. If your lifter is acting erratic you will need to change the "default mode" for the Remote Call control within the settings of the wireless headset...
|
|
|
Which cables do I need to use with a Jabra Wireless headset when using an Aastra Phone (6753i, 6755i, 6757i, 6757i CT)?
|
|
| |
In order to properly use a Jabra wireless headset with the following Aastra phones (6753i, 6755i, 6757i, 6757i CT). You will need two cables: the link below will take you to the kit that provides both the Jabra and Aatra cables required for remote answering and pick up of calls with the Jabra heads...
Tagged: compatible, telephone, wireless headsets, 9330e, 9330, 9120, 9125, 9350, remote lifter, gn1000, rhl, mitel, ehs, remote answering, bluetooth, module, PRO, gn920, 920
|
|
|
My Jabra PRO 920 headset is not activating the lifter to pickup the handset. How do I fix that issue? |
|
| |
In the course of using the headset it you may have inadvertently put it into a different mode. If you are using the GN1000 lifter with the PRO 920 you want to make sure that it is in the correct mode to use the GN1000. Follow these steps to get it in the correct Remote Call Control mode. Put o...
|